Use one of these Quick Start programming summaries for fast setup of your control panel with typical local, Audible Monitored or
Central Station Monitored options.
QUiCk stArt 1 - loCAl system, simPly ProgrAm A User CoDe
STeP KeySTROKeS
DeSCRIPTION
COMMeNT
1
P 1 2 3 e
enters User Program Mode.
Program light will turn on. (Default User Code is 123).
2
P 2 0 1 e
Selects the option for User Code 1.
The existing code will be displayed.
3
_ _ _ _ e
enter your new PIN code followed by e.
Keypad codes can be 3 to 6 digits in length.
4
_ _ _ _ e
enter your new PIN code again.
The new code will be displayed.
5
P e
To exit program mode.
Program light will turn off.
QUiCk stArt 2 - AUDible monitoring
STeP KeySTROKeS
DeSCRIPTION
COMMeNT
1
P 1 2 3 e
enters User Program Mode.
Program light will turn on. (Default User Code is 123).
2
P 0 0 0 0 0 0 e
enters Installer Program Mode.
Program light will flash. (Default Installer Code is 000000).
3
P 2 0 1 e
Selects the option for User Code 1.
The existing code will be displayed.
4
_ _ _ _ e
enter your new PIN code followed by e.
Keypad codes can be 3 to 6 digits in length.
5
_ _ _ _ e
enter your new PIN code again.
The new code will be displayed.
6
P 8 6 e 4 e
Turns on option P86e 4e
enables Audible Monitoring.
7
P 7 0 e
Selects the option for Telephone Number 1.
8
_ _ _ _ _ _ _ _ e
enter the telephone number followed by e.
30 digits maximum.
9
P e
To exit program mode.
Program light will turn off.
QUiCk stArt 3 - CentrAl stAtion monitoring
STeP KeySTROKeS
DeSCRIPTION
COMMeNT
1
P 1 2 3 e
enters User Program Mode.
Program light will turn on. (Default User Code is 123).
2
P 0 0 0 0 0 0 e
enters Installer Program Mode.
Program light will flash. (Default Installer Code is 000000).
3
P 2 0 1 e
Selects the option for User Code 1.
The existing code will be displayed.
4
_ _ _ _ e
enter your new PIN code followed by e.
Keypad codes can be 3 to 6 digits in length.
5
_ _ _ _ e
enter your new PIN code again.
The new code will be displayed.
6
P 8 6 e 2 e
Turns on option P86e 2e
enables Contact ID format.
7
P 7 0 e
Selects the option for Telephone Number 1.
8
_ _ _ _ _ _ _ _ e
enter the telephone number followed by e.
30 digits maximum.
8
P 7 2 e
Selects the option for Account Number 1.
10
_ _ _ _ e
enter the Account number followed by e.
4 digits maximum. The account number is supplied by your
central monitoring station.
11
P e
To exit program mode.
Program light will turn off.
SPeCIAl FUNCTION
PROGRAM
MODe
KeyPReSS
SeND DIAlleR TeST RePORT
Send a Dialler Test Report to the telephone number programmed at P70e.
USeR
P 66666666 e
(eight 6's)
SIReN TeST
Turn the Siren, Reset and Strobe Outputs On. Pressing P e will stop the Siren Test (and also exits
Program Mode).
USeR or
INSTAlleR
P 77777777 e
(eight 7's)
PANel ReSeT
This function resets the microprocessor. The effect is the same as powering down and powering up
again. INSTAlleR'S TIP: Use P88888888e prior to powering down for a short time. This will save the
current Time Before Next Test Call and the Real Time Clock into permanent memory. On power up
these times will be restored.
USeR or
INSTAlleR
P 88888888 e
(eight 8's)
DISPlAy SOFTWARe VeRSION
This function displays the panel software version when in program mode. Displayed in decimal
format by the zone leDs. example, version V6.1 is displayed by flashing 6 followed by 1.
USeR or
INSTAlleR
P 99999999 e
(eight 9's)
sPeCiAl FUnCtions in ProgrAm moDe
12
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
P r o g r A m m i n g
Содержание D16xD
Страница 94: ...NOTES ...
Страница 96: ......
