NEC Versa LX, Руководство пользователя

Страница: 154 / 215

7-8 Solving System Problems
Using the Product Recovery CD
If you determine that you need to restore your system to its initial
installation state follow the instructions given here.
In the Windows NT environment you can use the repair/emergency disk
to restore your system to its current state of operation without reverting
to its initial installation state. To create a repair/emergency disk, open a
DOS command box and type RDISK to launch the RDISK utility. Refer
to the online help for information about the RDISK utility. For details
about using the repair/emergency disk, look in the online help under the
NT Commands, RDISK and WINNT32.
Note:
Only use the Product Recovery CD as a
last resort. Check the problem checklist at the
beginning of this chapter for information about
solving problems before using the CD. The Product
Recovery CD provides a variety of options that
either remove or replace existing files. This may
result in data loss.
Guidelines for Using the Product Recovery CD
Use the following guidelines when using the Product Recovery CD.
!
Use AC power.
!
Do not dock the system.
!
Remove all optional hardware such as PC cards, USB devices,
printers, and monitors. For more information, see the online
documentation.