NovaScale R620 User Guide
ft Remote Management Card
ft Remote Management Card function is compatible only with R620-LR model (R620-MR model is installed as a
standard).
An ft Remote Management Card needs to be installed on each CPU/IO module in order to use ft Remote Management
Cards.
IMPORTANT:
Even when the server is powered off (the POWER LED is off), the power is supplied to the server if the power cords
are connected. Therefore, before adding any ft Remote Management Card, you must remove all power cords from
the AC inlets. If ft Remote Management Cards are installed with the power cords connected, the server and the ft
Remote Management Cards may be damaged.
ft Remote Management Cards can only be installed into the dedicated slots. If they are installed into other slots such
as slots for PCI EXPRESS, the server and the ft Remote Management Cards may be damaged.
Since the sensor information specific to the server is not written to the added ft Remote Management Card, the
messages below are displayed and the start-up process temporally stops when starting the server (POST). The server
may be in such a state when our logo screen is displayed and the start-up process is stopped. Press
ESC
to delete the
logo screen and check the diagnostic message.
H/W Configuration of BMC is corrupted.
!! Update BMC H/W Configuration by configuration tool !!
!! Refer to BMC configuration manual !!
When the messages above are displayed, press
F1
or POST starts if you wait for a while. EXPRESSBUILDER starts
by inserting the EXPRESSBUIDER CD-ROM that comes with the server into the CD-ROM drive. Select the
[Tools] menu - [Initialize Remote Management Card] from the EXPRESSBUILDER main menu and write the
sensor information specific to the server.
The ft Remote Management Card is extremely sensitive to static electricity. Make sure to touch the metal frame of
the server to discharge static electricity from your body before handling the PCI board. Do not touch the board
terminals or its parts with a bare hand or place the board directly on the desk. For more information on static
electricity, see "ANTI-STATIC MEASURES" on page 8-3.
Make sure to read "ANTI-STATIC MEASURES" on page 8-3 and "PREPARING YOUR SYSTEM FOR
UPGRADE" on page 8-4 before starting installing or removing options.
8-28
Содержание Bull NovaScale R620 Series
