NEC Bull NovaScale R620 Series, Руководство пользователя

Страница: 173 / 346

NovaScale R620 User Guide
No. Error message Action
26
Invalid retry interval You can only use numeric values.
27
"To" is too long. Specify the value within 128 characters.
28
"From" is too long. Specify the value within 128 characters.
29
"Subject" is too long. Specify the value within 256 characters.
30
The message is too long. The message should be up to 1024 characters.
31
Failed to open the file: The specified file may not exist. Check the file name.
32
Failed to close the file: The specified file may be corrupted.
33
Can’t open the file: The specified file may not exist. Check the file name.
34
Timeout has occurred.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
Firmware update errors
No. Error message Action
1 There are uncompleted update
images on BMC as follows:
Reboot the server to complete the update.
2 Failed to acquire status of the
update area. The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
3 Update data is too large: Some update files may be corrupted. Obtain update files again.
4
Failed to prepare update
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
5
Invalid file size: The update file may be corrupted. Obtain the update file again.
6 Could not find the revision
information:
Some update files may be corrupted. Obtain update files again.
7
Failed to create rollback image.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
8
Failed to erase.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
9 Unsupported format version: Some update files may be corrupted. Obtain update files again.
10 Failed to load the update image
file.
Some update files may be corrupted. Obtain update files again.
11
Update has failed.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
12 Could not switch to the update
mode. Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
13 Could not find the update targets: Some update files may be corrupted. Obtain update files again.
14 Invalid address: Some update files may be corrupted. Obtain update files again.
15
Writing has failed.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
16 Unsupported token is detected: Some update files may be corrupted. Obtain update files again.
17 Invalid segment information: Some update files may be corrupted. Obtain update files again.
18 Invalid data length: Some update files may be corrupted. Obtain update files again.
19
Failed to open the file: The specified file may not exist. Check the file name.
20 Failed to close the file: The specified file may be corrupted.
21 Invalid file checksum: Some update files may be corrupted. Obtain update files again.
22 Failed to parse files. Some update files may be corrupted. Obtain update files again.
23 Failed to parse files: Some update files may be corrupted. Obtain update files again.
24 Failed to load files: Some update files may be corrupted. Obtain update files again.
25 Could not find files: Some update files may be corrupted. Obtain update files again.
26
Failed to verify
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
27 Update will be stopped because Check clients. A software program other than you are using may have
4-74