NEC Bull NovaScale R620 Series, Руководство пользователя

Страница: 308 / 346

NovaScale R620 User Guide
PREPARING YOUR SYSTEM FOR UPGRADE
Note the following, when installing or replacing devices, to improve the performance of NovaScale/ft Server series.
„ With the NovaScale/ft Server series, devices can be replaced during the continuous operation. Take extreme care for
electric shock and damage to the component due to short-circuit.
„
Optional devices cannot be installed or removed during continuous operation. Normally, shutdown Windows Server
2003, check that the server is powered off, disconnect all power cords and interface cables from the server before
installing or removing the optional devices.
„
To remove the CPU or PCI module during the continuous operation, disable the intended module (place the module
off-line) by using the Server Maintenance Utility of the ESMPRO Agent or the ESMPRO Manager from the
management PC on the network. After a new module is installed to the server, enable the module using the Server
Maintenance Utility or the ESMPRO Manager.
TIPS:
The system is defaulted to automatically boot the module, once installed. For more information, see Chapter 5.
„ Make sure to provide the same hardware configuration on both groups.
„
Use the same slots and sockets on both groups.
„
Do not install devices having different specifications, performance, or features.
„ Before removing the setscrews from the CPU/IO modules, place the desired module off-line using the Server
Maintenance Utility or the ESMPRO Manager.
.
8-4