NEC Bull NovaScale R620 Series, Руководство пользователя

Страница: 195 / 346

NovaScale R620 User Guide
Therefore, you need to check the status of the other modules based on alert information.
Status Colour after Mounting a Hard Disk
When creating a new mirror, the status of the hard disk and its upper component, SCSI enclosure, will continue to
change after you mount a hard disk until the mirror is completed. The OS may take several minutes to recognize
changes of disk status or the disk may need to be rescanned. During this process, the status colour may turn to abnormal,
but when the mirror is created successfully, it will return normal.
LAN Monitoring Report
The LAN monitoring function defines the line status depending on the number of transmission packets and the number
of packet errors within a certain period. Thus, the LAN monitoring function may report a line fault or high line load
only in a temporary high line impedance state. If a normal state recovery is reported immediately, temporal high line
impedance may have occurred thus there is not any problem.
LAN Monitoring Threshold
Because hardware faults on the network are found in the driver level, ESMPRO Agent does not monitor line faults.
Thus, the value set for "Line fault occurrence rate" of a [LAN] tab of [ESMPRO Agent properties] in the control panel
is not used.
Community Authority
Depending on your OS type or its version, settings for community, SNMP service’s security function, are not made, or
default settings of authority are different
To enable the remote shutdown and threshold change functions via ESMPRO Manager, make settings of community
and set its authority to "READ CREATE" or "READ WRITE."
Monitoring with ESMPRO Manager Ver.4.22 or Earlier
ESMPRO Manager Ver.4.23 or later is required for monitoring the server.
If you are using an older version, you must install ESMPRO Manager using the CD-ROM shipped with the server.
ESRAS Utility
ESRAS Utility runs on NovaScale series with ESMPRO Agent installed, and is used to display, print, and initialize logs
and export them to a file.
If you use the ESRAS Utility of ESMPRO Manager, logs may not be displayed on some servers. Make sure to use
ESRAS Utility of ESMPRO Agent. ESRAS Utility of ESMPRO Agent is included in the CD-ROM attached to the
server. Install it using the utility related to ESMPRO setup.
Coexistence with the Oracle products
The installation of the Oracle products may change Start-up Type of SNMP Service into “Manual”. If so, change the
setting back to “Automatic” and set up correctly according to the description of the Oracle product.
Change of SNMP Community
If the security setting of the SNMP Service of a system, where the ESMPRO Agent is installed, is changed from the
default “public” to a community name, change the community settings of the ESMPRO Agent, too.
1.
Double-click the [ESMPRO Agent] icon in [Control Panel].
2.
Select a desired community name from the [SNMP Community] list box in [SNMP Setting] of the [General]
5-21