![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556276.webp)
NovaScale R620 User Guide
7-14
The memory check may take a time if the memory size is large. Wait for a while.
Did you perform any keyboard or mouse operation immediately after you started the server?
If you perform any keyboard or mouse operation immediately after start-up, POST may accidentally
detect a keyboard controller error and stops proceeding. In such a case, restart the server once again.
Do not perform any keyboard or mouse operation until the BIOS start-up message appears when you
restart the server.
Does the server have appropriate memory boards or PCI card?
Operation of the server with unauthorized devices is not guaranteed.
Server reboots while running the SCSI
Select
utility:
Have you modified the Setup settings?
From [Server] - [Monitoring Configuration] - [Option ROM Scan Monitoring] of Setup, select
“
Disabled.
”
If [Option ROM Scan Monitoring] is enabled, the system may reboot while using the
SCSI
Select
utility. Change back the setting after you finish using the utility.
Fail to access to internal or external devices:
Are cables properly connected?
Make sure that the interface cables and power cord are properly connected. Also make sure that the
cables are connected in the correct order.
Is that device compliant with NovaScale/ft Server series?
Operation of the server with unauthorized devices is not guaranteed.
Is the power-on order correct?
When the server has any external devices connected, power on the external devices first, then the
server.
Did you install drivers for connected optional devices?
Some optional devices require specific device drivers. Refer to the manual that comes with the device
to install its driver.
Is SCSI controller (including options) configuration correct?
If the sever has an optional SCSI controller board and SCSI devices are hooked up to the server, make
correct settings by the SCSI controller board
’
s SCSI BIOS utility. For details, see manuals included
with the SCSI controller board.
Is SCSI device configuration correct?
If external SCSI devices are connected to the server, you need to make settings of SCSI ID and
terminal resistance. For details, see manuals included with the SCSI device.
CPUs not in Duplex mode:
Check if the memory configuration is correct.
Check if third-party CPUs or memory (DIMM) are used.
Disks not in Duplex mode:
Unless you perform mirroring (including reconfiguration after failed disks are replaced) in correct
order, the mirror may not be (re)configured. Check if the steps were correct.
Содержание Bull NovaScale R620 Series
