NEC Bull NovaScale R620 Series, Руководство пользователя

Страница: 198 / 346

NovaScale R620 User Guide
Floppy Disk Drive Information
If you add or delete floppy disk drive connected with USB while the system is running, the drive information under the
[I/O Device] in the data viewer will be updated at the next system start-up.
When the Displayed BIOS Information is Incorrect
Additional information of BIOS which is displayed by clicking [ft] - [CPU Module] - a CPU module - [General] -
[BIOS Information] on a Data Viewer or by clicking a CPU module and clicking [BIOS Information] on Server
Maintenance Utility may not be displayed correctly. In such a case, display the BIOS information on a Data Viewer by
clicking [ESMMIB] - [BIOS].
Ethernet Adapters You Do Not Use
If an Ethernet adapter is not used (not connected to cable), set it to “Disable” in [Network Connections] from Control
Panel. If an Ethernet adapter you are about to disable has dual LAN settings (AFT function), remove the dual LAN
settings before disable it.
Monitoring in Sleep State
ESMPRO Manager cannot monitor the ESMPRO Agent machine in the sleep state (system standby or system halt
state).
While ESMPRO Manager monitors server shutdown, the relevant ESMPRO Agent machine may be entered into the
sleep state. If so, the report "server access disabled" is issued and the status colour of the server icon becomes gray. This
cannot indicate whether the ESMPRO Agent machine is shut down or entered into the sleep state. Keep these in mind
when operating the system where systems to be monitored may enter the sleep state.
Printer Information’s Available Time:
When you add a new printer, install its driver and make its settings, if you do not make settings for the available time
from the properties window of the printer, the printer’s available time (From and To) in [Printers and Faxes] are [00:00],
on the other hand, ESMPRO Manager’s time are [9:00]. To display them properly, make the settings of printer from its
properties window. The procedures are as follows:
1.
From [Control Panel], click [Printers and Faxes], and open the properties window of a printer for making
settings.
2.
Select the [Advanced] tab.
3.
Enter values in the available time (“Available from” and “To”), and click [OK] on the properties window to exit.
Now, you can see the correct information from ESMPRO Manager, too.
5-24