NEC Bull NovaScale R620 Series, Руководство пользователя

Страница: 131 / 346

NovaScale R620 User Guide
CLEAR CMOS/PASSWORD
With the pre-installed SETUP utility, you can set desired passwords to protect data stored on the server from
unauthorized user access. If you forget the password, you can clear them by following the procedure described in this
section.
You can also use the same procedure to clear the CMOS data in the server.
IMPORTANT:
„
Clearing the CMOS data restores the factory settings.
„
To clear the password or CMOS data, power off the server.
To clear the password or the CMOS data, use configuration jumper pins (jumper switches) located inside of the server.
The jumper switches are found on the motherboard in a CPU/IO module. See the figure below.
IMPORTANT:
Do not change any other jumper switch settings. Any improper change may cause the server to fail or malfunction.
Use clips on
pins 11 and 12
Pins for protecting/clearing
password
Pins for protecting/
clearing CMOS data
Use clips on pins 1 and 3
Pins for BMC configuration
4-32