For your safety
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
12/103
2.5
EMC installation guidelines
Industrial use
The device is manufactured according to the current state-of-the-art stan-
dards. Both the robust mechanical construction and the design of the electron-
ic components make it ideal for industrial use.
To guarantee trouble-free operation, observe the following rules when install-
ing the devices in systems. Otherwise, the high interference immunity and re-
sistance to damage of the devices may become partially ineffective.
The resistance to interference of the entire system considerably depends on
the correct installation, location and wiring.
1 |
Check the installation instructions of the manufacturer of the control unit
to ensure safe operation.
2 |
These instructions should be followed in compliance with the recommen-
dations for EMC-compliant installation.
3 |
Then install the device.
2.6
Notes on electrostatically sensitive equipment
NOTICE
Electrostatic sensitive product!
The assemblies may get damaged.
Do not connect/disconnect any connectors or lines while they are ener-
gized!
Ensure sufficient grounding of persons and working material!
Measurements
Observe the following notes for measurements on electrostatically sensitive
equipment:
Discharge potential-free measuring instrument briefly.
Ground the measuring instruments used.
2.7
Notes on spare parts and accessories
Spare parts
Only use the original spare parts or spare parts by other manufacturers ex-
pressly authorized by Murrelektronik GmbH.
Check the function of the device after having replaced a component.
Accessories
The use of accessories may alter the device function. Use only accesso-
ries authorized by Murrelektronik GmbH.
Observe the enclosed instructions of the accessories when installing
them.
