Web server
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
72/103
Synchronizing the system time with server times
Enter the IP address of a connected NTP server here.
Click the plus icon
(+)
.
You can enter a maximum of 16 NTP servers.
It can take a few minutes to synchronize the time with the time server. The syn-
chronization status is shown in the status column.
NOTE
The algorithm decides which NTP server to use for synchronization purposes.
This is a dynamic process and dependent on the availability and relative ac-
curacy of the time servers that have been entered.
Example: NTP server of the National Metrology Institute:
Synchronizing the system time with server times from ptbtime1.ptb.de
Enter the IP address 192.53.103.108 for the server ptbtime1.ptb.de.
Click the plus icon
(+)
.
Take time from PC
Takes the time from the PC
Click the
Take time from PC
button.
Peer state
The following information is provided in the
Peer state
field:
Tab. 11-4: Peer state
Deleting the peer connection
Click the
X
button.
Object
Description
IP address
IP address of the NTP server
Status
Status of the state machine
Last event
Last event of the NTP server
Dispersion
The largest error relative to the primary reference
32 bit field
Fixed point number in seconds
Offset
The difference between the system time of the switch and
the server time
Delay
Entire round-trip delay to the primary reference source
X
Button for deleting the Peer state
