Web server
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
75/103
11.5
PORTS menu
The ports of the TREE-managed PROFINET switches can be configured indi-
vidually. This section contains basic settings.
11.5.1
Port table
Fig. 11-13: PORTS > Port table
The port table provides an overview of existing ports and their status. You can
configure the most important parameters of the ports here. The table provides
the following information:
Tab. 11-5: Overview of ports
NOTE
Port link alarm contact monitoring
is only active in TREE M-6TX.
Table entries
Description
Port-No.
Number of the port
Port type
Port transfer type
Port state
You can activate/deactivate the port here.
Port link state
Specifies the link state, e.g., 100Mbit FD.
Port mode
You can configure the
port mode
here.
Settings options:
Auto-negotiation
10 MBit half-duplex
10 MBit, full-duplex
100 MBit half-duplex
100 MBit, full-duplex
Port link SNMP monitoring You can activate/deactivate
port link SNMP monitoring
here.
Port link alarm contact mon-
itoring
You can activate/deactivate
port link alarm contact
monitoring
here.
Port link alarm contact monitoring
monitors this port
for link-downs. The alarm message is output using the
relay contact.
