Mounting
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
41/103
6.5
Removing the device
Removal from the
mounting rail
Removing the cables
First remove the electricity cables.
Removing the brackets
Remove any brackets that have been fitted.
Disconnecting multiple devices from one another
If multiple devices are connected together, disconnect them from each
other as you go along the mounting rail.
Fig. 6-3: Removing the switch
Removal
1 |
Use a suitable tool (e.g., a screwdriver) to
pull the tabs downwards.
Both tabs must remain in a disengaged
state.
2 |
Swivel the bottom of the switch a little away
from the mounting rail.
3 |
Lift the switch upwards off the mounting
rail.
1.
3.
2.
