Switch management
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
56/103
A GetRequest can be used to send this OID to the switch. The switch will re-
spond with a GetResponse message containing the result.
NOTE
Some of the data in the MIB of the switch is read-only, some is readable
and writable.
The majority of the read-only data consists of counters.
The majority of the read/write data consists of values that can be used to
configure the behavior of the switch.
Read-only MIB data can be divided into static data (in flash storage) and
dynamic data (in RAM).
The majority of the read/write data is dynamic.
Exceptions:
sysContact, sysName and sysLocation in the MIB-II system group are
stored in the flash memory.
All other data is set to its default setting when the system is started.
