Web server
User manual 58185_TREE M4/6-TX PN IP20_hdb_en_10
79/103
11.6
NETWORK menu
You can configure RSTP details under the menu item
Network > RSTP con-
figuration
.
11.6.1
RSTP configuration
Fig. 11-16: NETWORK > RSTP configuration
Status overview
The
RSTP
page provides a
status overview
in the left-hand table and the
configuration
of the switch on the right-hand side.
Tab. 11-6: RSTP state overview
Configuration
You can use the
Configuration
table to adjust the RSTP parameters of the
switch:
Tab. 11-7: RSTP settings
Status
Description
Bridge state
Displays whether the switch is the root bridge.
Time since last topology
change
The amount of time in days, hours and minutes since the
network topology last changed.
Numbers of topology
changes
Number of topology changes since RSTP was activated.
Root bridge
The current root bridge in the network.
Root port
The port that can be used to reach the root bridge.
Root cost
Root path cost.
Max age [s]
Maximum age controls how long a switch port retains
configuration information.
Hello time [s]
The amount of time after which a BPDU is sent by the
RSTP.
Forward delay [s]
The forward delay is the time that is spent in the listening
and learning state.
Parameters
Description
RSTP enabled
Enable or disable RSTP here.
Priority
Enter the priority of the switch (ID).
Max age [s]
Enter the maximum age of an RSTP message.
Hello time [s]
Enter the amount of time after which RSTP should
send a BPDU.
Forward delay [s]
Enter the amount of time that should be spent in the
listening and learning state.
