HES
User Manual
HART to Ethernet Gateway System
226-710-00A
September 2018
www.miinet.com
[8]
Moore Industries-International, Inc.
primary and non-primary variables out of limits; primary variable analog output fixed and more
HART status data. It can also be configured to read the Additional Status from the Field Devices
(using command 48).
Network configuration.
Supports DHCP or fixed IP address, subnet mask and gateway
settings (NAC client), auto
negotiation and auto MDIX.
Security.
Two layer security. User and Network configuration can be independently write
protected using hardware jumpers (see Section 3) and the number of connections
(MODBUS/TCP and HART-IP) can be set by the user (see Section 5).
Easy MODBUS mapping selection
.
Provided by variable or by device grouping.
Simple to Configure.
Configure over HART-IP, using PACTware or other FDT host and
supplied DTM. Easy to use menus provide full configuration of HES, HART channel
communications and MODBUS data.
Webpage monitoring and status.
A built-in web server in the HES provides quick and easy
viewing of HES and HART field device status, HART device variable data and its MODBUS
register address using any web browser.
Operating power.
9-30DC
Model Numbers and Options
The following section provides details of the Moore Industries model number and the available
options for the HES.
Moore Industries uses the model and serial numbers of our instruments to track information
regarding each unit that we sell and service. If a problem occurs with your instrument, check for
a tag affixed to the unit listing these numbers. Supply the Customer Support representative with
this information when calling.
Moore Industries model numbers for HES is structured as follows:
HES/4HART/ETH/9-30DC/-MB [DIN]
Unit/Input/Output/Power/-Options [Housing]
Refer to Section 10 Ordering Information for a quick reference table of ordering information.
