HES
User Manual
HART to Ethernet Gateway System
226-710-00A
September 2018
www.miinet.com
[16]
Moore Industries-International, Inc.
To access the network settings of any HES, run the NAC Client on a PC connected to the same
network as the HES or, if no network is available, connect an Ethernet cable between the
Ethernet port of the HES and PC.
1. Start the NAC Client by clicking on the icon in the Start Menu.
2. Once the program is running, click “Find All”. If more than one HES is on the network,
the NAC Client will list them all.
3. Either use the serial number to identify the HES, or simply disconnect the network cable
from the HES in question, click “Find All” again and determine which HES disappeared
from the list.
Figure 2.1. NAC Client showing HES default setting with DHCP enabled.
To change the network settings for the HES, double-click on the HES that you want to change.
This will open a second window where you can view and change all network settings. Click
OK
when you are finished.
If you receive an error, you may have an incorrect setting in the network window.
Figure 2.2 – NAC Client showing HES with DHCP disabled and showing a user specific IP
address.
