HES
User Manual
HART to Ethernet Gateway System
226-710-00A
September 2018
www.miinet.com
[29]
Moore Industries-International, Inc.
Section 4 – HES Configuration
Four different pieces of software are required for configuring your HES. They are available on
the Moore Industries’ CD shipped with the HES or for download from Moore Industries’ web site
at
http://www.miinet.com/
. The software required includes:
•
PACTware v. XXX (Download the latest version) or any FDT frame application
•
Moore Industries MIIP Communications DTM
•
Moore Industries’ HES Device DTM
•
Moore Industries’ Network Address Configuration (NAC) Client
For users who already have an FDT Frame Application, all the following information is still
relevant except for the PACTware installation. For more information on FDT/DTM please refer
to www.fdtgroup.org.
FDT Frame Application
Moore Industries has always provided proprietary software to configure and operate our field
instruments to the full extent. The HES will require the use of an FDT frame application, which
allows configuration and adjustment of any and all field instruments, which have a DTM. For
users who do not already have an FDT frame application, Moore Industries provides
PACTware.
An FDT frame application, such as PACTware, is a PC program, which interfaces with individual
software modules for instrument operation. This interface is regarded as the FDT; the individual
software modules for instrument adjustment are called DTMs (Device Type Manager). This
configuration makes user-friendly adjustments possible because the interface for instrument
adjustment is optimally adapted to each instrument.
When installing the version of PACTware supplied by Moore Industries, the installation will
include three communication DTMs. They are a HART Communication DTM, and two
proprietary communication DTMs. The MISP DTM stands for Moore Industries Serial Port and
the MIIP DTM stands for Moore Industries Internet Protocol. The HES only uses the MIIP DTM.
FDT/DTM Software Installation
In order to get started you will need to either install the PACTware software and DTMs or just
install the DTMs (if you already have an FDT frame application installed). All the files you need
can be found on our website www.miinet.com.
The PACTware installer file will install PACTware and all required communication DTMs. The
HES and other device DTMs need to be installed separately (see below).
PACTware_vxxx_FDT_DTM_Installation_Moore_Industries.exe
When you run the installer, you will have the option to select which components you want to
install.
