HES
User Manual
HART to Ethernet Gateway System
226-710-00A
September 2018
www.miinet.com
[17]
Moore Industries-International, Inc.
Verifying the HES Ethernet Connection
To test the HES Ethernet connection, open a web browser (for example Internet Explorer) and
type the IP address of the station into the address bar. If you are successful, you will see a web
page entitled “HES: HART Ethernet System”.
Testing your HES
To test that your HES is operating properly you will need the following:
Table 2.1. Assembling the Necessary Equipment
Device
Specifications
HART Load Resistor
250 – 1100 ohms
Power Supply
9 – 30Vdc
Personal Computer
Microsoft Windows based PC; 16Mb free RAM;
20MB free disk space on hard drive; Microsoft
Windows 7 or 10
Ethernet cable
Internet Explorer (or other web browser)
HART Field Device
At least one HART device to be used to test the
functionality of the HES
MODBUS/TCP Host
To be used to verify the transfer of data from the
HART Field Device to the MODBUS/TCP Host
