HES
User Manual
HART to Ethernet Gateway System
226-710-00A
September 2018
www.miinet.com
[23]
Moore Industries-International, Inc.
Section 3 – Wiring and Installation
Instructions in this section and others may require special precautions to ensure the safety of
the personnel performing the operations. Notes, Cautions and Warnings that may cause
potential safety issues are indicated throughout this manual by symbols, please refer to the
Safety Message Page.
Terminal Designations
The following figures (3.1-3.4) are the terminal designation information for both the single and
four channel HES.
Figure 3.1. Top Terminal Configuration for Single Channel HES
Top Terminals (Left to Right)
T1
T2
T3
Input Single
Channel
TX
+IN
-IN
Figure 3.2. Top Terminal Configuration for Four Channel HES
Top (Left to Right)
T1
T2
T3
T4
T5
T6
T7
T8
T9
Input Four
Channel
TX
+IN
-IN
+IN
-IN
+IN
-IN
+IN
-IN
Channel 1
Channel 2
Channel 3
Channel 4
Figure 3.3. Bottom Terminal Configuration for Single and Four Channel HES
Bottom Terminals (Left to Right)
B1
B2
B3
Power 9-30VDC
(+)DC
(-)DCC
GND
