Mitsubishi MELSEC-Q QD77MS, Руководство пользователя

Страница: 651 / 976

12 - 26
Chapter 12 Expansion Control
Set time that reaches "
Pr.17
Torque limit setting value
" from 0% in "
Cd.144
Torque
time constant at torque control mode (Forward direction)
" and time that decreases 0%
from "
Pr.17
Torque limit setting value
" in "
Cd.145
Torque time constant at torque control
mode (Negative direction)
". The value at torque control mode switching request is
valid for "
Cd.144
" and "
Cd.145
".
The command torque during torque control mode is limited with "
Pr.17 Torque limit
setting value
". If the torque exceeds torque limit setting value is set, a warning
"Torque limit value over" (warning code: 520) will occur, the operation is controlled
with torque limit setting value.
Confirm the command torque to servo amplifier with "
Md.123
Torque during
command
".
Cd.145
0
t
0
200 300 -100 -200 0 0
Pr.17 Torque limit setting value
20.0
30.0
-10.0
-20.0
Torque
[%]
Pr.17 Torque limit setting value
Cd.143 Command torque at
torque control mode
Cd.144
Torque time
constant at torque
control mode
(Forward direction)
Torque time
constant at torque
control mode
(Negative direction)
Cd.144
Torque time
constant at torque
control mode
(Forward direction)
Cd.145
Torque time
constant at torque
control mode
(Negative direction)
Md.123
The command torque to servo amplifier is stored
in " Torque during command.