Mitsubishi A1SD75P1-S3, Руководство пользователя

Страница: 146 / 622

5 - 49
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
[Table 1]
Pr.11
setting value
Pr.1
setting value
Value set with peripheral device
(unit)
Value set with sequence program
(unit)
0 : mm
–214748364.8 to 214748364.7 (
µ
m) –2147483648 to 2147483647 (
×
10
-1
µ
m)
1 : inch –21474.83648 to 21474.83647 (inch) –2147483648 to 2147483647 (
×
10
-5
inch)
2 : degree 0 to 359.99999 (degree)
0 to 35999999 (
×
10
-5
degree)
0 : Standard mode
3 : pulse –2147483648 to 2147483647 (pulse) –2147483648 to 2147483647 (pulse)
0 : mm
–13421772.8 to 13421772.7 (
µ
m)
–134217728 to 134217727 (
×
10
-1
µ
m)
1 : inch –1342.17728 to 1342.17727 (inch) –134217728 to 134217727 (
×
10
-5
inch)
2 : degree 0 to 359.99999 (degree) 0 to 35999999 (
×
10
-5
degree)
1 : Stepping motor
mode
3 : pulse –134217728 to 134217727 (pulse) –134217728 to 134217727 (pulse)
[Table 2]
Pr.11
setting value
Pr.1
setting value
Value set with peripheral device
(unit)
Value set with sequence program
(unit)
0 : mm 0.01 to 6000000.00 (mm/min) 1 to 600000000 (
×
10
-2
mm/min)
1 : inch 0.001 to 600000.000 (inch/min) 1 to 600000000 (
×
10
-3
inch/min)
2 : degree 0.001 to 600000.000 (degree/min) 1 to 600000000 (
×
10
-3
degree/min)
0 : Standard mode
3 : pulse 1 to 1000000 (pulse/s) 1 to 1000000 (pulse/s)
0 : mm 0.01 to 375000.00 (mm/min) 1 to 37500000 (
×
10
-2
mm/min)
1 : inch 0.001 to 37500.000 (inch/min) 1 to 37500000 (
×
10
-3
inch/min)
2 : degree 0.001 to 37500.000 (degree/min) 1 to 37500000 (
×
10
-3
degree/min)
1 : Stepping motor
mode
3 : pulse 1 to 62500 (pulse/s) 1 to 62500 (pulse/s)
Pr.47 Zero point address
Set the address used as the reference point for positioning control (ABS method).
(When the machine zero point return is completed, the stop position address is
changed to the address set in " Pr.47 Zero point address". At the same time, the
" Pr.47 Zero point address" is stored in " Md.29 Current feed value" and " Md.30
Machine feed value".)
Pr.48 Zero point return speed
Set the speed for zero point return.
Note) Set the "zero point return speed" to less than " Pr.7 Speed limit value". If
the "speed limit value" is exceeded, the "zero point return speed" will be
limited by " Pr.7 Speed limit value".
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com