Mitsubishi Electric GOT 1000 Series, Руководство по подключению

Страница: 166 / 436

3 - 52
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.5 Control Equipment Side Setting
3.5.14 Connecting to AUR350C,
AUR450C

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-A35, SLP-A45) of the
control equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.

Station address setting
Set the station address switch.
(1) For AUR350C
(2) For AUR450C
S
3.5.15 Connecting to RX

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-RX) of the control
equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
3.5.16 Connecting to CMC10B

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-CM1) of the control
equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.

Station address setting
Set the station address switch.
Item Set value
Transmission speed
*1
9600bps, 19200bps
Communication condition
selection
*1
8-bit data length, Even parity, Stop bit 1
8-bit data length, Non parity, Stop bit 2
Station address
*2*3
0 to F
Station No. setting switch
Station No. setting switch
Item Set value
Transmission speed
*1
9600bps, 19200bps ,38400bps
Communication condition
selection
*1
Even parity stop 1
(8-bit data length, Even parity, Stop bit 1)
Even parity stop 2
(8-bit data length, Even parity, Stop bit 2)
Odd parity stop 1
(8-bit data length, Odd parity, Stop bit 1)
Odd parity stop 2
(8-bit data length, Odd parity, Stop bit 2)
Station address
*2*3
1 to 32
Item Set value
Transmission speed
*1
9600bps, 19200bps
Communication format
*1
0:8-bit data length, Even parity, Stop bit 1
1:8-bit data length, Non parity, Stop bit 2
Station address
*2*3
0 to 99
Station No. setting switch