Mitsubishi Electric GOT 1000 Series, Руководство по подключению

Страница: 210 / 436

4 - 38
4. CONNECTION TO OMRON PLC
4.3 Ethernet Connection

Ethernet setting
*1 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
 Communication detail settings
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
User's Manual of GOT used.
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Item Description Set value
Host
The host is displayed. (The
host is indicated with an
asterisk (*).)
-
N/W No.
Set the network No. of the
connected Ethernet module.
(Default: blank)
1 to 127
PLC No.
*1
Set the station No. of the
connected Ethernet module.
(Default: blank)
1 to 254
Type OMRON (fixed)
OMRON
(fixed)
IP Address
Set the IP address of the
connected Ethernet module.
(Default: blank)
PLC side IP
address
Port No.
Set the port No. of the
connected Ethernet module.
(Default: 9600)
256 to 65534
Communication format
Select a communication
protocol. (Default: UDP)
UDP, TCP