Mitel Inter-Tel 5000, Руководство по установке и обслуживанию

Страница: 224 / 468

Chapter 5: Installation
Hardware Revision Identification
Page 5-102
Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
Hardware Revision Identification
Check the following areas to identify endpoint hardware types:
•
Endpoint Web Interface : The hardware type is displayed in the Firmware Information
field under Status – Firmware – Hardware Type.
•
LCD (Liquid Crystal Display) : The hardware type is displayed on the bottom line of the
LCD on startup.
•
Product ID and Revision : The part number and revision are displayed on the labels on
the bottom of the endpoint.
•
Message Lamp LED (Light-Emitting Diode) Pattern : The hardware type is identified by
the message lamp LEDs during startup. The user must reset the endpoint first.
•
Ethernet Ports : The number of Ethernet interfaces can be used to identify the hardware
type.
Table 5-13 on page 5-102 lists the hardware types and identification methods.
Table 5-13. Hardware Revision Identification
Endpoint
Hardware
Type
LCD
Product ID
(p/n)
LED Pattern
Ethernet
Port
Model 8600 — original 8600 Not
Available 550.8600 The endpoint LEDs
flash in a left-right
alternative blinking
pattern. 1 Port
Model 8620 — original 8620 8620 550.8620 Not Available 1 Ports
Model 8622 — original 8622 8622 550.8622 Not Available 2 Ports
Model 8662 — original 8662 8662 550.8662 Not Available 2 Ports
Model 8662 — enhanced 8662 8662 550.8662E Not Available 2 Ports
Model 8600 — enhanced,
redesigned 8600v2 Not
Available 550.8600 The endpoint performs
a blinking LED pattern
of the XFER, CNF,
MSG, FWD, and DND
button LEDs. 1 Port
Model 8622 –
enhanced, redesigned 8622v2 8622v2 550.8622 Not Available 2 Ports
Model 8662 –
enhanced, redesigned 8662v2 8662v2 550.8662E Not Available 2 Ports
Model 8622 — PoE Class 2 8622 8622 550.8622P Not Available 2 Ports
Model 8662 — PoE Class 2 8662 8662 550.8662P Not Available 2 Ports