Mitel Inter-Tel 5000, Руководство по установке и обслуживанию

Страница: 213 / 468

Chapter 5: Installation
Saving the System and Voice Processor Databases
Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
Page 5-91
Saving the System and Voice Processor Databases
After the System and Voice Processor databases have been programmed for the first time,
perform a database save. Store this database in a safe place so it can be used should the
current the database become corrupted and must be re-entered. This saved database can be
used as a starting point for the re-entry. In addition, keep a current copy of the database that
you can update every time you make changes.
To save the system and voice processor databases:
1. From the DB Studio menu bar, select Operations – Database Operations – Database
Save . The following window displays, allowing you to save the database to disk.
2. In the Save To: text box, enter the name of the file where the database will be saved. Or,
select Browse to locate the file. This file is saved to the local database PC in the default
directory shown.
NOTICE
If using an external voice processing system, the EM Unit or Voice Processing Unit must
remain attached when saving and restoring the database. If the unit is not attached,
converted voice mail information, such as non-associated mailboxes and cascade levels, will
not be restored.
IMPORTANT
Performing a Database Save or Database Restore operation will cause the
system to slow down. If at all possible, these operations should not be
performed during normal business hours when the system is being used to
place and receive calls.