Micromeritics DVVA II 4000 Скачать руководство пользователя страница 230

Страница: 230 / 254

Appendix A

DVVA II 4000

A-16

400-42803-01 (Rev B) - July 2017

6003- File (file name) cannot be opened. It is currently being setup for an analysis.

6004

An analysis cannot be performed on (file name). It is open for editing and contains
errors.

6005- The edit session for (file name) must be saved before the analysis. Save changes

and continue with the analysis?

6006-

At least one report item must be selected. Press Cancel if you do not want a report.

Cause:

You attempted to open a file that is currently being used in an analysis.

Action:

Select a different file.

Cause:

You attempted to start an analysis using a file that contains errors and is
open for editing.

Action A:

Finish editing the file, save, and close it, or choose a different file. Then
restart the analysis.

Cause:

You attempted to start an analysis using a file that contains unsaved
changes and is still open.

Action:

Click

Yes

to save the changes and proceed with the analysis.

Click

to cancel the analysis and (1) continue editing the file, save and

close it; or (2) click

Browse

and choose a different file.

Cause:

You failed to select reports in the

Selected Reports

list window. No out-

put could be produced.

Action:

Ensure that at least one report is selected for the sample and re-submit
the sample for reporting, or click

Cancel

Содержание DVVA II 4000































































































































































































































































Результаты поиска

Содержание DVVA II 4000

Отзывы:

Похожие инструкции для DVVA II 4000

Бренды по названию

Популярные бренды

Micromeritics DVVA II 4000, Руководство оператора

Результаты поиска

Содержание DVVA II 4000

Отзывы:

Похожие инструкции для DVVA II 4000

Бренды по названию

Популярные бренды