Micromeritics DVVA II 4000 Скачать руководство пользователя страница 59

Страница: 59 / 254

DVVA II 4000

Generating Graph Overlays

400-42803-01 (Rev B) - July 2017

3-27

Generating Graph Overlays

Use graph overlays when you wish to compare graphically results for multiple samples or multi-
ple graphs for one sample.

Graph overlays can be implemented in two ways:

• Multiple-Sample Overlays

Overlay results for up to eight samples on top of a previously selected sample.

• Multiple-Graph Overlays

Overlay two different types of graphs from one sample.

You must use the Advanced format to specify graph overlays.

Multiple-Samples Overlay

This type of overlay enables you to choose up to eight sample files from which to overlay data of
the same type as the currently selected one.

1. Open the desired file. If your dialog is in the Basic format, click

Advanced

to switch to the

Advanced format.

2. Click the Report Options tab to display the Report Options dialog.

3. Select reports as desired.

Содержание DVVA II 4000































































































































































































































































Результаты поиска

Содержание DVVA II 4000

Отзывы:

Micromeritics DVVA II 4000, Руководство оператора, Страница: 59 / 254

Результаты поиска

Содержание DVVA II 4000

Отзывы: