Micromass Quattro Ultima, Руководство пользователя

Страница: 83 / 227

Modifying an Existing Function
To modify an existing function:
Select the function in the function list.
Press , or double click on the function.
This displays the appropriate editor for the function type and allows changes to
be made.
The function list display is updated to show any changes.
Entering a new a value in Total Run Time and pressing sets the maximum
retention time for the experiment. The ratio of the functions defined is
maintained. For example, if two functions are defined one from 0 to 5 minutes
and the other 5 to 10 minutes then a
Total Run Time of 10 minutes is
displayed. If this value is changed to 20 then the first function now runs from 0
to 10 minutes and the second from 10 to 20 minutes.
Copying an Existing Function
To copy an existing function:
Select the function in the function list.
Select Copy and then Paste from the Edit menu.
Modify the parameters as described above.
Removing a Function
To remove a function:
Select the function in the function list.
Press , choose Delete from the Edit menu, or press Del on the keyboard.
When asked to confirm the deletion, select Yes .
Changing the Order of Functions
Functions are displayed in ascending Start Time and End Time order and this order
cannot be changed. For functions that have the same start and end time the order in
which they are performed can be changed as follows:
Highlight the required function.
Press or repeatedly until the function is in the required position.
Data Acquisition
Page 83
Quattro Ultima
User's Guide