Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 59 / 160

47
DigiSuite LX MAX cables
DigiSuite LX MAX cables
Analog video cable
The DigiSuite LX MAX analog video cable, shown in the following
diagram, supports any of these combinations of video connections:
✃
Two Y/C (S-Video) connections.
✃
Two composite connections.
✃
One Y/C and one composite connection.
✃
One analog component and one composite connection.
³Warning Simultaneous Y/C (S-Video) and analog component input
and output connections are not supported on DigiSuite LX MAX. IN
Y/C 2 should
never be connected at the same time as IN Y2/Y/
COMPS2 and/or IN C2/R-Y, as this will short-circuit your hardware
and damage your equipment. Similarly, do
not attempt to connect
PROGRAM Y/C at the same time as PROGRAM Y and/or PROGRAM
R-Y/C, as this will lead to the double termination of your signals. If
you wish to use Y/C and analog component equipment simultaneously,
you must disconnect the Y/C connector before you connect the BNC
connectors, and vice versa. Remember that you must also change your
Video
cable
connector
Top
Bottom
PROGRAM Y/C
PROGRAM B-Y
KEY OUT
PROGRAM COMPS
IN Y1/COMPS1
IN C1/B-Y
IN Y2/Y/COMPS2
IN C2/R-Y
IN Y/C 2
REF IN
PROGRAM Y
PROGRAM R-Y/C
PREVIEW COMPS
PREVIEW Y/C
Note: To connect a single S-Video VTR, use IN Y/C 2.
To connect a second S-Video VTR, use an adapter to
attach IN Y1/COMPS1 to IN C1/B-Y.