Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 124 / 160

112
Chapter 8, DigiSuite LX MAX Troubleshooting
Possible cause 5 Out of date drivers The driver for your motherboard or SCSI drive may
be out of date.
Solution Get a newer driver Contact the hardware company and acquire a newer
version of the driver. Consult “System Recommendations” located in the
DigiSuite Customer Support section of our web site at
www.matrox.com/
videoweb/support for more information.
Possible cause 6 Paging file settings Your paging file settings may need to be modified.
Solution Modify paging file setting Modify your paging file settings. For more
information about paging file settings, see “Optimizing your Windows
2000 virtual memory” on page 74 .
DigiSuite video output is jumpy
Possible cause Improper genlocking Your genlock termination and/or cable
connections may not be set up properly.
Solution Check genlock Check various aspects of your genlock setup as follows:
1 If you’re using an external sync signal, make sure the cable is properly
connected and terminated only once.
2 Select the External VTR Quality setting in the General dialog box of
the DigiSuite Configuration program only if you’re genlocking to your
source VTR.
3 Finally, try the Internal genlock setting in the General dialog box. If
the video output from DigiSuite is fine, then you know there is
probably something wrong with the external genlock setup.
4 Try clearing the Source has built-in TBC option in the DigiSuite LX
Video In dialog box of the DigiSuite Configuration program.
5 Monitor the live video directly from the VTR to determine its stability
before using it as a DigiSuite genlock source.
6 If the source video is fine, but the video output from DigiSuite is still
jumpy, check your genlock setup.
DigiSuite output colors seem incorrect
Possible cause 1 Improper cable connections Your input/output cables could be
improperly connected. For instance, if you mix up the three analog
component connections, your video monitor will display the wrong color
information.
Solution Check cabling You need to check your cable connections as follows: