Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 128 / 160

116
Chapter 8, DigiSuite LX MAX Troubleshooting
Possible cause 3 Out of date drivers You may be using a hardware key (dongle) with an
out-of-date driver.
Solution Get a newer driver Contact the hardware company and acquire a newer
version of this driver. Consult “System Recommendations” located in the
DigiSuite Customer Support section of our web site at
www.matrox.com/
videoweb/support for more information.
Possible cause 4 Conflicts with network card You may be getting conflicts from a
network card.
Solution Check system operation without card Try removing the card. If the
problem goes away, get updated drivers for the network card or try another
network card.
Possible cause 5 Low-quality sync Your sync signal may not be stable or may have a
faulty connection.
Solution Check sync source If you’re using an external sync source, make sure
that it’s properly connected and that you have a good-quality sync signal
(stable with no noise).
Possible cause 6 Check VIP ribbon cable connection Your VIP ribbon cable may not
be properly connected.
Solution Connect VIP ribbon cable Make sure your VIP ribbon cable is properly
attached and secured to both the MAX card and your display card. For more
information, see
“Connect the VIP ribbon cable to your Matrox display
card” on page 31 .