Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 110 / 160

98
Chapter 7, Configuring Your DigiSuite LX MAX
Configuring your VTR settings
°Important
The following procedures do not apply to DV-1394 devices,
such as the DV camcorder or deck you’ve connected to your Matrox MAX.
These procedures apply to RS-422 devices only.
The DigiSuite Configuration program lets you configure your VTR for
RS-422 device control with DigiTools and many nonlinear editing
programs, such as Adobe Premiere, IMC Incite, and United Media
On-Line Express.
Be aware that some editing programs provide their own RS-422 device
control, and therefore don’t use DigiSuite’s VTR settings as explained in
this section. For example, Speed Razor and Discreet edit use their own RS-
422 device control rather than DigiSuite’s.
If after configuring your VTR using the DigiSuite Configuration program
you find that you have frame-accurate capture and printing to tape with
DigiTools but
not with your nonlinear editing program, then your program
uses its own RS-422 device control. In this case, see your program’s
documentation for instructions on how to set up and configure your VTR
for device control.
¬
To configure your VTR for DigiSuite RS-422 device control:
1 Connect your VTR as explained in the “Working with Clips Using
DigiTools” chapter of your
DigiSuite MAX User Guide .
2 Switch your VTR to Remote mode.
3 Install DigiTools with the VTR driver or the Matrox realtime plug-in
for Adobe Premiere as explained in the previous chapter of this
manual.
4 Start the DigiSuite Configuration program, click the
Card Set 1
tab,
then the
VTR Settings
tab.