Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 38 / 160

26
Chapter 4, Installing Your DigiSuite LX MAX Hardware
✃
Never force the parts together! Align the bus connector carefully and
gently press it into place. When you’re sure the connector is properly
seated, insert the two mounting screws in their holes and turn them
several times with a screwdriver.
✃
Do not overtighten the Movie-2 bus mounting screws! Even when the
screws are properly tightened, there will be a small space between the
Movie-2 bus circuit board and the top of the cards.
✃
When installing or removing your Movie-2 bus, be sure to do so in a
straight motion with no significant lateral angle. Failure to do so will
result in bent pins and/or broken connectors.
✃
If you have to remove your Movie-2 bus, use a simple tool to gently
pry it loose at one end—one of the blank metal plates used to cover an
empty computer slot position works well. Then do the same with the
other end of the connector.