23
© 2010 Magnum Energy, Inc.
3.0 Setup
01 Router Setup
The following menus are used to set up the router screen and clock.
01A Set Time:
The router contains a real time clock that must be set
for proper operation of some features. These features are: the SETUP
button’s
02C AC In-Time
,
04B Gen Run Time
,
04G Quiet Time
,
04H Gen
Exercise,
and the
Fault History
menu items under the TECH button.
**IMPORTANT**
It is very important that you set the time clock as it is a critical piece in
effectively addressing fault issues, as well as for the proper start/stop
functions of your AGS device, if installed.
Info:
The clock obtains power from the inverter and will reset if
the router is disconnected from the inverter.
To Set the Current Time
From the
Set Clock
menu:
Rotate the SELECT knob to the hour of day, and then press
SELECT.
Rotate the SELECT knob to the correct minute setting, and then
press SELECT.
Rotate the SELECT knob to the appropriate AM or PM setting, and
then press SELECT.
01B Display:
This setting adjusts the contrast and brightness of the
LCD screen based on the current lighting conditions and viewing angle.
Default settings
-
Contrast = 100%
,
Brightness = 50%
01C Power Save:
This setting turns off the Power Save
™
feature, or
selects the time (from
off
to
60
minutes) that determines when the
display goes into Power Save mode. This setting also allows the Port LEDs
to be turned “
off
” or set to “
Auto
” mode. In Auto mode, the Port LEDs
automatically blink whenever a device is connected to a router port.
Default setting
-
PowerSave [min] = 15
,
Port LEDs = Auto
What is the Power Save feature?
The Power Save feature turns off the
LCD backlight and the LEDs on the router to conserve energy. The router
goes into Power Save mode if there hasn’t been a button press or fault
message for a period of time (this time is determined by the SETUP menu’s
01C Power Save
setting). Whenever the router goes into the Power Save
mode, the LCD backlight and the LEDs can be reactivated by pressing any
button. If you have a fault during the Power Save mode, the LCD backlight
and the FAULT LED will come on and stay on as long as the fault is present.
Info:
If you want the LCD backlight and LEDs to always be on,
you will need to turn the Power Save feature off by selecting
PowerSave [min] = off
.
Info:
If you want the Port LEDs to always be off, you will need
to set the Port LEDs to
Port LEDs = off
.
01D Temp Display:
This menu item selects whether to display
temperatures in Fahrenheit or Celsius. Once you select either Fahrenheit
or Celsius, the following menu items will appear with this selection:
•
1.
2.
3.
•
•
•
