Magnum Energy ME-RTR Скачать руководство пользователя

Страница: 17 / 80

3.0 Setup

When a router is connected to a Magnum inverter/charger, the settings in the

router determine the inverter/charger’s operating parameters. The router’s

default settings are adequate for most installations; however, you have the

option to change some of the operating parameters. This section shows you

how to navigate the router and gives you an understanding of the function of

each adjustable setting. See Figures 4-1

thru 4-9

for complete maps of the

router’s menu items and adjustable settings.

3.1 Navigating the Router

Familiarize yourself with the controls on the front panel which are used to

nd,

adjust, and save the desired settings (refer to Figure 1-1). They are:
•

LCD Display

The 4-line LCD display shows status and info for the inverter/

charger and any attached accessories. All setup menus and faults also appear

on the LCD display.

Info:

The LCD display returns to the System Home screen to show

system status after 5 minutes if no buttons have been pressed.

Info:

When the

“

←

”

(left facing arrow) symbol is shown on the

screen it indicates that the displayed setting has been selected

and will be used.

•

Menu

Pushbuttons (x5)

These buttons allow simple access to menu

items that can help with con

guring, monitoring, and troubleshooting your

inverter/charger system.
•

Rotary SELECT Knob

This rotary knob allows you to quickly scroll through

and select various menu items and settings. Pressing the knob selects the

menu item to change, or saves the current selection. Refresh the LCD display

by holding the rotary knob down for seven seconds.

Info:

The LCD screen features a 4-line display. If there are

more choices than will

t on the screen, up and down arrows

are present to guide you in accessing those choices. An

up arrow

indicates you must rotate the SELECT knob counterclockwise to

display the next line. A

down arrow

requires a clockwise rotation.

If both an

up and down arrow

display, rotate the SELECT knob

clockwise or counterclockwise to display all hidden lines.

*** IMPORTANT ***

All settings/setup menus in the router are compatible with MS-PAE Series

inverter/chargers. If you are using the router with another inverter/charger

(other than the MS-PAE Series), some features and setup menus may not

be compatible with your inverter and will not function. Contact Magnum

Energy to determine if a particular feature/setup menu provided in the

router is compatible with your inverter.

Set AC In Control
Auto Connect
VDC Connect
EDIT Control

Set AC In Control
VDC Connect
Time Connect
EDIT Control

Set AC In Control
Time Connect
AC In – Disabled
EDIT Control

Figure 3-1, Up and Down Arrows for Hidden Lines

Содержание ME-RTR

















































































Результаты поиска

Содержание ME-RTR

Отзывы:

Похожие инструкции для ME-RTR

Бренды по названию

Популярные бренды

Magnum Energy ME-RTR, Руководство пользователя

Результаты поиска

Содержание ME-RTR

Отзывы:

Похожие инструкции для ME-RTR

Бренды по названию

Популярные бренды