LSI LSI53C1000, Техническое руководство

Страница: 258 / 384

5-24 SCSI SCRIPTS Instruction Set
A[6:0] Register Address - A[6:0] [22:16]
It is possible to change register values from SCRIPTS in
read-modify-write cycles or move to/from
SCSI First Byte
Received (SFBR) cycles. A[6:0] selects an 8-bit
source/destination register within the LSI53C1000.
IMMD Immediate Data [15:8]
This 8-bit value is used as a second operand in logical
and arithmetic functions.
A7 Upper Register Address Line [A7] 7
This bit is used to access registers 0x80–0xFF.
R Reserved [6:0]
5.4.2 Second Dword
This section describes the second Dword of the Read/Write Instruction
register.
Figure 5.8 Read/Write Instruction - Second Dword
DA Destination Address [31:0]
This field contains the 32-bit destination address where
the data is to move.
5.4.3 Read-Modify-Write Cycles
During these cycles the register is read, the selected operation is
performed, and the result is written back to the source register.
The Add operation is used to increment or decrement register values (or
memory values if used in conjunction with a Memory-to-Register Move
operation) for use as loop counters.
Subtraction is not available when SCSI First Byte Received (SFBR) is
used instead of data8 in the instruction syntax. To subtract one value
from another when using SFBR, first XOR the value to subtract
(subtrahend) with 0xFF, and add 1 to the resulting value. This creates the
2’s complement of the subtrahend. The two values are then added to
obtain the difference.
31 24 23 16 15 8 7 0
DSPS Register