LS SV-iG5H Series, Руководство пользователя, Страница: 54 / 226

40
Function list
5.2 Function group 1
LED
display
Address
for
communi-
cation
Parameter
name
Min/
Max
range
Description
Factory
defaults
Adj.
during
run
Page
F 0 A200 [Jump code] 0 - 99 Sets the parameter code number to jump. 1 O 28
F 1 A201
[Forward/
Reverse run
disable]
0 - 2
0 Fwd and rev run enable
0 X 81 1 Forward run disable
2 Reverse run disable
F 2 A202 [Accel pattern]
0 - 1
0 Linear
0 X 86
F 3 A203 [Decel pattern] 1 S-curve
F 4 A204
[Stop mode
select]
0 - 3
0 Decelerate to stop
0 X
92
1 DC brake to stop
2 Free run to stop
3 Power Braking stop
131
F 5 A205
[Power On
Start select]
0 - 1
This parameter is activated when drv is set
to 1 or 2 (Run/Stop via Control terminal).
Motor starts acceleration after AC power is
applied while FX or RX terminal is ON.
0 O 82
F 6 A206
[Run Time
Delay]
0-
6000.
0
[sec]
Run after the time set 0 X 118
F 8
1)
A208
[DC Brake
start
frequency] 0.1 -
60
[Hz]
This parameter sets DC brake start
frequency.
It cannot be set below F23 - [Start
frequency].
5.00 X
95
F 9
1)
A209
[DC Brake
wait time] 0 - 60
[sec]
When DC brake frequency is reached, the
inverter holds the output for the setting
time before starting DC brake.
0.1 X
F10
1)
A20A
[DC Brake
voltage]
0 -
200
[%]
This parameter sets the amount of DC
voltage applied to a motor.
It is set in percent of H33
– [Motor rated
current].
50 X
F11
1)
A20B
[DC Brake
time] 0 - 60
[sec]
This parameter sets the time taken to
apply DC current to a motor while motor is
at a stop.
1.0 X
F12 A20C
[DC Brake
start voltage]
0 -
200
[%]
This parameter sets the amount of DC
voltage before a motor starts to run.
It is set in percent of H33
– [Motor rated
current].
50 X
96
F13 A20D
[DC Brake
start time] 0 - 60
[sec] DC voltage is applied to the motor for DC
Brake start time before motor accelerates.
0 X
F14 A20E
[Time for
magnetizing a
motor]
0 - 60
[sec]
This parameter applies the current to a
motor for the set time before motor
accelerates during Sensorless vector
control.
0.1 X
F20 A214
[Jog
frequency]
0 -
400
[Hz]
This parameter sets the frequency for Jog
operation.
It cannot be set above F21
– [Max
frequency].
10.00 O 98
1)
Only displayed when F 4 is set to 1 (DC brake to stop).