LS SV-iG5H Series, Руководство пользователя, Страница: 50 / 226

36
Programming Keypad & Basic operation
Frequency setting via potentiometer & operating via the 4.7.3
Run key
1 Apply AC input power to the inverter.

2 When 0.00 is displayed, press the Up (

) key three times.

3
“drv” is displayed. Operating method is selectable. 
Press the Ent (

) key.

4
Check the present operating method (
“1”: Run via control terminal). 
Down (

) key once.

5
After setting
“0”, press the Ent (

) key. When 0 is blinking, press

the Ent again.
6
“drv” is displayed after “0” is blinking. Operation method is set via 
the Run key on the keypad. -. Press the Up (

) key once.
7
Different frequency setting method is selectable.

Press the Ent (

) key.

8
Check the present frequency setting method (
“0” is run via keypad). 
Press the Up (

) key three times.

9
After checking
“
3
” (frequency setting via potentiometer), press the 
Ent (

) key.
10
“
Frq
” is displayed after “3” is blinking. Frequency setting is set via 
the potentiometer on the keypad.
Press the Down (

) key four times.

Turn the potentiometer to set to 10.0 Hz in either Max or Min

direction.
11
Press the Run key on the keypad.

RUN lamp begins to blink with FWD lamp lit and accelerating

frequency is displayed on the LED.
When run frequency 10Hz is reached, 10.00 is displayed as shown

left.
Press the STOP/RST key.

12
RUN lamp begins to blink and decelerating frequency is displayed

on the LED.
When run frequency is reached to 0Hz, Run and FWD lamp turn off

and 10.00 is displayed.