LS SV-iG5H Series, Руководство пользователя, Страница: 49 / 226

35
Programming Keypad & Basic operation
B
a
s
ic
O
p
s
.
Frequency Setting via potentiometer & operating via 4.7.2
terminals
1 Apply AC input power to the inverter.

2 When 0.00 appears Press the Up (

) key four times.

3
Frq is displayed. Frequency setting mode is selectable.

Press the Ent (

) key once.

4
Present setting method is set to 0 (frequency setting via keypad).

Press the Up (

) key three times.

5
After 3 (Frequency setting via potentiometer) is set, press the Ent

(

) key once.
6
Frq is redisplayed after 3 stops blinking.

Press the Down (

) key four times.

Turn the potentiometer to set to 10.00 Hz in either Max or Min

direction.
7
Turn on the switch between P1 (FX) and CM (See Wiring below).

RUN lamp begins to blink with FWD lamp lit and the accelerating

frequency is displayed on the LED.
When run frequency 10Hz is reached, the value is displayed as

shown left.
Turn off the switch between P1 (FX) and CM terminals.

8
RUN lamp begins to blink and decelerating frequency is displayed

on the LED.
When run frequency is reached to 0Hz, Run and FWD lamp turn off

and 10.00 is displayed.
Wiring Operating pattern