LS SV-iG5H Series, Руководство пользователя, Страница: 55 / 226

41
Function list
Fu
nc
tio
ns
Lis
t
Function group 1
LED
display
Address
for
communi-
cation
Parameter
name
Min/
Max
range
Description
Factory
defaults
Adj.
during
run
Page
F21 A215
[Max
frequency]
40 -
400
[Hz]
This parameter sets the highest frequency
the inverter can output.
It is frequency reference for Accel/Decel
(See H70)
Any frequency cannot be set above
Max frequency except Base frequency
50.00 X 93
F22 A216
[Base
frequency]
30 -
400
[Hz] The inverter outputs its rated voltage to
the motor at this frequency (see motor
nameplate).
50.00 X 88
F23 A217
[Start
frequency]
0.1 -
10
[Hz] The inverter starts to output its voltage at
this frequency.
It is the frequency low limit.
0.50 X
93
F24 A218
[Frequency
high/low limit
select]
0 - 1
This parameter sets high and low limit of
run frequency.
0 X
F25
1)
A219
[Frequency
high limit]
0 -
400
[Hz]
This parameter sets high limit of the run
frequency.
It cannot be set above F21
– [Max
frequency].
50.00 X
F26
1)
A21A
[Frequency
low limit]
0 -
400
[Hz]
This parameter sets low limit of the run
frequency.
It cannot be set above F25 - [Frequency
high limit] and below F23
– [Start
frequency].
0.50 X
F27 A21B
[Torque Boost
select]
0 - 1
0 Manual torque boost
0 X 90
1 Auto torque boost
F28 A21C
[Torque boost
in forward
direction]
0 - 15
[%]
This parameter sets the amount of torque
boost applied to a motor during forward
run.
It is set in percent of Max output voltage.
4.0 X 90
F29 A21D
[Torque boost
in reverse
direction]
This parameter sets the amount of torque
boost applied to a motor during reverse
run.
It is set as a percent of Max output voltage
4.0 X 90
1)
Only displayed when F24 (Frequency high/low limit select) is set to 1.