Lexmark X560(n), Руководство пользователя

Страница: 69 / 210

Setting the copy margins
Note: The ADF cannot be used for this feature.
1
From the printer control panel, press System .
2
Press or repeatedly until
Default Settings
appears, and then press OK .
3
Press or repeatedly until
Copy Defaults
appears, and then press OK .
4
Press or repeatedly until
Margin Width
appears, and then press OK .
5
Press or repeatedly to select the margin you would like to change, and then press OK .
6
Press or repeatedly to adjust the margin, and then press OK .
7
Repeat the steps for other margins, and then press repeatedly until
Select Function
appears.
8
Load an original document facedown on the scanner glass.
9
From the printer control panel, press Copy .
10
Use the keypad to enter the number of copies.
11
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
12
Press or repeatedly until
Margin
appears, and then press OK .
13
Press or repeatedly until
On
appears, and then press OK .
14
Press Start to begin copying.
Canceling a copy job
To cancel a print job, press Stop at any time.
Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before
the stop command was sent.
Canceling
appears on the display, and the remaining buffered pages are printed
before the job is canceled.
Copying
69
Downloaded From ManualsPrinter.com Manuals