Firmware
≤
11.00 - DMS 8.0 EN - 10/2011
L
811
8400 StateLine C | Reference manual
Function library
Function blocks | L_MPot_1
16.1.23.1 Activate & control motor potentiometer
When
bInAct
is set to FALSE, the motor potentiometer is activated.
The currently active function depends on the current output signal
nOut_a
, the limit
values set and the control signals at
bUp
and
bDown
.
When the
nOut_a
output signal is outside the limits set, the output signal runs to the
next limit with the Ti times set. This process is independent of the control signals at
bUp
and
bDown
.
When the
nOut_a
output signal is inside the limits set, the output signal changes
according to the control signals at
bUp
and
bDown
.
[16-11] Example: Control of the motor potentiometer
nOut
_
a
t
t
TRUE
FALSE
bUp
t
TRUE
FALSE
b
D
o
w
n
nHighLimit
nLowLimit
0
wTir
wTir
wTif
wTir
bUp
bDown
bInact
Function
FALSE
FALSE
FALSE
The
nOut_a
output signal remains unchanged.
TRUE
FALSE
The
nOut_a
output signal runs to its upper limit value (
nHighLimit
).
FALSE
TRUE
The
nOut_a
output signal runs to its lower limit value (
nLowLimit
).
TRUE
TRUE
The
nOut_a
output signal remains unchanged.
-
-
TRUE
The motor potentiometer function is deactivated. The
nOut_a
output signal responds according to the function selected via
Function
.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
