Lenovo x3650 M5 Скачать руководство пользователя страница 215

Страница: 215 / 1340

0000

Adapters

Brackets

Adapter connector (slot 4)

Adapter connector (slot 5)

Expansion-slot covers

Figure 138. Adapter installation

Step 7.

Rotate the retention bracket to the close position.

Step 8.

Connect any required cables to the adapter.

Attention:

• When you route cables, do not block any connectors or the ventilated space around any of

the fans.

• Make sure that cables are not routed on top of components that are under the riser-card

assembly.

• Make sure that cables are not pinched by the server components.

Step 9.

Perform any configuration tasks that are required for the adapter.

Step 10. Reinstall the top cover (see “Replacing the top cover” on page 151).

Step 11. Slide the server into the rack.

Step 12. Reconnect the power cords and any cables that you removed.

Step 13. Turn on the peripheral devices and the server.

Replacing an adapter in the rear two hard-disk-drive kit

Use this information to replace an adapter in the rear two hard-disk-drive kit.

To install an adapter, complete the following steps:

Step 1.

Read the safety information that begins on “Safety” on page v and “Installation guidelines” on
page 297.

Step 2.

Turn off the server and peripheral devices and disconnect the power cords and all external cables.

Step 3.

Remove the server top cover (see “Removing the top cover” on page 149).

Step 4.

Remove the rear two hard-disk-drive kit (see “Removing the rear two hard-disk-drive kit” on
page 207).

Step 5.

Slide the retention bracket; then,

rotate it to the open position.

Chapter 5

Installing, removing, and replacing components

203

Содержание x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание x3650 M5

Отзывы:

Похожие инструкции для x3650 M5

Бренды по названию

Популярные бренды

Lenovo x3650 M5, Инструкция по установке и обслуживанию

Результаты поиска

Содержание x3650 M5

Отзывы:

Похожие инструкции для x3650 M5

Бренды по названию

Популярные бренды