Lenovo ThinkServer TD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 109 / 226

8. Grasp the PCIe card by its edges and carefully pull it out of the PCIe card slot. The PCIe card fits tightly
into the PCIe card slot. If necessary, alternatively move each side of the PCIe card a small and equal
amount until it is completely removed from the slot.
Figure 56. Removing the PCIe card
9. Install a new PCIe card to replace the old one. See “Installing a PCIe card” on page 90. Otherwise,
install the bracket for the PCIe card slot to cover the place.
10. Close the latch for the PCIe card slot.
11. If you are instructed to return the old PCIe card, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 180.
• If you are removing a RAID card, reconfigure RAID for your server. See “Configuring RAID” on page 65.
Installing or removing the SD module
This topic contains the following items:
• “Installing the SD module” on page 95
• “Removing the SD module” on page 96
Installing the SD module
Attention: Do not open your server or attempt any repair before reading and understanding “Read this first: safety
information” on page iii and “Guidelines” on page 69.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the SD module and follow those instructions in addition to
the instructions in this topic.
Chapter 6
.
Replacing hardware
95