Lenovo ThinkServer TD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 102 / 226

• To optimize system performance, ensure that you follow the memory module installation rules when
performing the operation. See “Memory module installation rules” on page 82.
• Use any documentation that comes with the memory module and follow those instructions in addition to
the instructions in this topic.
To install a memory module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,
clean, and static-protective surface. See the Rack Installation Instructions that comes with the server. If
the server is in tower form factor, lay the server on its side for easier operation.
3. Remove the server cover. See “Removing the server cover” on page 72.
4. Remove the cooling shroud. See “Removing the cooling shroud” on page 75.
5. Locate the memory slots on the system board. See “System board components” on page 47.
6. Remove any parts and disconnect any cables that might prevent your access to the memory slots.
7. Open the retaining clips of the appropriate memory slot. See “Memory module installation rules” on
page 82 for the installation sequence information.
Figure 48. Opening the retaining clips of the memory slot
8. Touch the static-protective package that contains the new memory module to any unpainted surface on
the outside of the server. Then, take the new memory module out of the package.
Note: Carefully handle the memory module by its edges.
88
ThinkServer TD350 User Guide and Hardware Maintenance Manual