Lenovo 7D1J Скачать руководство пользователя страница 228

Страница: 228 / 246

•

FQXPMOS0009K: Current System Boot Mode is Legacy. LXPM OS installation only support UEFI

Mode.

Severity: Warning

User Action:

1. Change boot mode to UEFI mode

2. Retry OS deployment.

•

FQXPMOS0028I: [arg1] OS installed

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMSD0001M: HDD Test was interrupted by the host with a hardware or software reset

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0002M: A fatal error or unknown test error occurred while the device was executing its

self-test

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0003M: self-test completed having a test element that failed and the test element that

failed is not known.

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0004M: self-test completed having the electrical element of the test failed.

Severity: Error

224

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

Содержание 7D1J























































































































































































































































Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды

Lenovo 7D1J, Справочник

Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды