Lenovo 7D1J Скачать руководство пользователя страница 214

Страница: 214 / 246

•

FQXSFSR0001M: [arg1] GPT corruption detected, DiskGUID: [arg2]

Severity: Warning

User Action:

Complete the following steps:

1. Remove all the external drive during POST to avoid this event false triggered.

2. Check the XCC event log, if this event has a follow up recovery event log, means GTP corruption has

been recovered successfully, then ignore this event message and do not perform the remaining
steps.

3. Back up the data disk.

4. Press F1 Setup->SystemSettings->Recovery->Disk GPT Recovery and set to "Automatic."

5. Save settings and restart the system.

6. Boot to F1 setup; system automatically tries to recover the GPT during the POST.

7. Restart the system.

8. Re-format the LUN or disk and re-install the OS.

9. If the problem persists, collect Service Data logs.

10. Contact Lenovo Support.

•

FQXSFSR0002I: [arg1] GPT corruption recovered, DiskGUID: [arg2]

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFSR0003G: The number of boot attempts has been exceeded. No bootable device found.

Severity: Warning

User Action:

Complete the following steps:

1. Remove AC power from the system.

2. Connect at least one bootable device ot the system.

3. Connect AC power to the system.

4. Power on system and retry.

5. If the problem persists, collect Service Data logs.

6. Contact Lenovo Support.

•

FQXSFTR0001L: An invalid date and time have been detected.

Severity: Warning

User Action:

Complete the following steps:

1. Check the XCC event logs. This event should immediately precede an FQXSFPW0001L error.

Resolve that event or any other battery related errors.

2. Use F1 Setup to reset date and time.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

210

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

Содержание 7D1J























































































































































































































































Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды

Lenovo 7D1J, Справочник

Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды