Lenovo 7D1J Скачать руководство пользователя страница 178 | Manualshive

Страница: 178 / 246

background image

Table 4. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSFMA0016M

Memory spare copy failed. [arg1]

Warning

FQXSFMA0027M

DIMM [arg1] Self-healing, attempt post package repair (PPR) failed at
Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6].
[arg7]

Warning

FQXSFMA0028M

DIMM [arg1] Self-healing, attempt post package repair (PPR)
exceeded DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4]
Bank [arg5] Row [arg6] on Device [arg7]. [arg8]

Warning

FQXSFMA0030K

Intel Optane PMEM DIMM [arg1] Percentage Remaining is less than
[arg2]% and still functioning.

Warning

FQXSFMA0031K

Intel Optane PMEM DIMM [arg1] has reached 1% remaining spares
block and still functioning.

Warning

FQXSFMA0032M

Intel Optane PMEM DIMM [arg1] has no remaining spares block.

Warning

FQXSFMA0033M

Intel Optane PMEM persistent memory interleave set has [arg1]
PMEMs(DIMM [arg2]), [arg3] DIMMs' location is not correct.

Warning

FQXSFMA0034M

DIMM [arg1] (UID: [arg2]) of Intel Optane PMEM persistent memory
interleave set should be moved to DIMM slot [arg3] in sequence.

Warning

FQXSFMA0035M

Intel Optane PMEM interleave set should have [arg1] PMEMs, but
[arg2] PMEMs are missing.

Warning

FQXSFMA0036M

DIMM [arg1] (UID: [arg2]) of Intel Optane PMEM persistent memory
interleave set is missing.

Warning

FQXSFMA0037G

Intel Optane PMEM interleave set (DIMM [arg1]) is migrated from
another system (Platform ID: [arg2]), these migrated PMEMs are not
supported nor warranted in this system.

Warning

FQXSFMA0038K

All Intel Optane PMEMs could not be auto unlocked because of no
passphrase.

Warning

FQXSFMA0039K

One or more Intel Optane PMEMs could not be auto unlocked
because of invalid passphrase.

Warning

FQXSFMA0040K

Invalid Intel Optane PMEM configuration detected. Please verify
PMEM configuration is valid.

Warning

FQXSFMA0041K

Near Memory/Far Memory ratio (1:[arg1].[arg2]) for Intel Optane
PMEM configuration is not in recommended range (1:4 - 1:16).

Warning

FQXSFMA0047M

SPD CRC checking failed on DIMM [arg1]. [arg2]

Warning

FQXSFPU0022G

The TPM configuration is not locked.

Warning

FQXSFPU0023G

Secure Boot Image Verification Failure Warning.

Warning

FQXSFPU0033G

Processor has been disabled.

Warning

FQXSFPU4033F

TPM Firmware recovery is in progress. Please DO NOT power off or
reset system.

Warning

FQXSFPU4035M

TPM Firmware recovery failed. TPM chip may be damaged.

Warning

FQXSFPU4040M

TPM selftest has failed.

Warning

FQXSFPU4043G

TPM Firmware update aborted. System is rebooting...

Warning

FQXSFPU4050G

Failed to update TPM Firmware.

Warning

174

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

«
...
176
177
178
179
180
...
»

Содержание 7D1J























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 7D1J

Бренд: D-Link Страницы: 38

Epress EtherNetwork DP-301P+

Бренд: D-Link Страницы: 2

ShareCenter Pro DNS-1200-05

Бренд: D-Link Страницы: 68

BladeCenter HS23

Бренд: IBM Страницы: 30

System x3950 X6

Бренд: IBM Страницы: 53

Бренд: Zonet Страницы: 33

88631SU - System x3850 - 8863

Бренд: IBM Страницы: 90

SuperServer 5013C-MT

Бренд: Supero Страницы: 98

SuperWorkstation 740A-T

Бренд: Supermicro Страницы: 138

TVS-72XU Series

Бренд: QNAP Страницы: 53

QuantaGrid D51PH-1ULH

Бренд: QCT Страницы: 167

ZPS3611 - QUICK

Бренд: Zonet Страницы: 1

ApplianceStor 75

Бренд: Rasilient Страницы: 24

Бренд: Gigabyte Страницы: 120

Eternus DX80 S2

Бренд: Fujitsu Страницы: 186

Бренд: Fujitsu Страницы: 242

LANTIME M100/GPS

Бренд: Meinberg Страницы: 38

cPCI-6510 Series

Бренд: ADLINK Technology Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды