Lenovo 7D1J Скачать руководство пользователя страница 231

Страница: 231 / 246

User Action:

Information only; no action is required.

•

FQXPMSR0021L: Failed to create new virtual disk.

Severity: Warning

User Action:

1. Ensure LXPM and RAID adapter firmware are at the latest levels.

2. Ensure the state of RAID adapter and disk drives are both healty.

3. Verify proper physical connection of the disk drive, SAS expander (if applicable)and RAID adapter.

4. Ensure the drive status is correct (Unconfigured Good).

5. Reboot the machine and retry to create new virtual disk.

6. If the problem persists, please contact technical support.

•

FQXPMSR0022I: Create new virtual disk successfully.

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMSR0031L: Failed to remove existing virtual disk

Severity: Warning

User Action:

1. Ensure LXPM and RAID adapter firmware are at the latest levels.

2. Ensure the state of RAID adapter and disk drives are both healty.

3. Verify proper physical connection of the disk drive, SAS expander (if applicable)and RAID adapter.

4. Reboot the machine and retry to remove the existing virtual disk.

5. If the problem persists, please contact technical support.

•

FQXPMSR0032I: Removed existing virtual disk successfully.

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMUP0001K: The system configuration does not meet the prerequisite

Severity: Warning

User Action:

1. Follow prompts to update the firmware and retry the update.

2. If the problem persists, please contact technical support.

•

FQXPMUP0002K: The selected packages are not compatible

Severity: Warning

User Action:

1. Follow prompts to update each individual firmware package.

Chapter 5

Lenovo XClarity Provisioning Manager V3 events

227

Содержание 7D1J























































































































































































































































Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды

Lenovo 7D1J, Справочник

Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды